Cost and Pollutant Reduction Benefit for and Industrial Stormwater Treatment System

Date / Time:
Tuesday, Sep 13 2:45pm to 3:15pm
Location:
Sunset I & II
Track / Session:
Industrial General Permit / TMDLs and Treatment System Effectiveness
Description/Abstract: 

This technical presentation will describe full scale implementation of four advanced treatment systems for industrial storm water from a 7-acre industrial facility. The four systems each treat between 400 and 800 gallons per minute using flow balancing, grit/oil separation, biopolymer flocculent addition, solids settling, and sand filtration. Two years of operating data show >95% pollutant reduction in over 5 million gallons of storm water and 100% compliance with numeric action levels contained 2014 Industrial General Permit. The presentation will focus on describing when active treatment is appropriate, regulatory approvals, treatment efficiency in terms of dollar-cost per pound of pollutant removed, and construction and operational challenges associated with large-scale, active industrial storm water treatment.

Primary Speaker:
Scott Bourne, CDIM Engineering, Inc.

Scott Bourne is a professional engineer with 17 years environmental consulting experience. His practice focuses on water quality, regulatory compliance and civil engineering for San Francisco Bay Area clients. Scott founded CDIM Engineering, Inc. in 2016 to provide environmental engineering services to mid-range San Francisco Bay Area construction, development, industrial and municipal clients. He holds a Bachelor of Science in Chemical Engineering from Ohio University and is licensed in California to practice civil (#C72817) and chemical (#CH 6131) engineering.

Supporting Speaker 1:
Mary Cunningham, CDIM Engineering, Inc.